cbd7d5f7455b34ba7807
-
0 名用户
正在关注
-
0 名用户
关注者数
-
160
订阅数
- 活动总数 417
- 最后的活动
- 成员加入日期
评论
cbd7d5f7455b34ba7807 最近的活动-
Your ref: > The collision offset - is that the Add'l Thickness - Collision (mm)...? Yes that's correct. To pull the collar together at the top but...
-
You can also tack the garment to the avatar for some control. Select the pattern piece itself > then navigate to the property editor and warp/wef...
-
No there are definitely problems on fit you need to address, this is where a fitters eye for problems differs form a laypersons whom might not deal...
-
Much better the crotch on the trousers is most probably ok now.
-
Nothing to do with the MD install. Each layer of cloth that has pressure applied for a quilted object MUST HAVE (< note how I stress that in caps) ...
-
You can change the orientation of the mesh import by changing the x,y,z, axis. You can do this prior to the import in your previous software or whe...
-
You can use an internal shape to cut the main pattern, and you can merge edges > however when you merge two patterns together that are not designed...
-
The jagged line is simply a reference I make to the knife pleat (fold) direction I want to follow (a sketch on the pattern piece) that I leave in a...
-
Check the cloth patterns are sewn the correct way around > go to single thickness view [ Alt+3] and check the dark side of the garment is pointed i...
-
Use a default fabric preset don't play with them until you have at least tried a basic fabric > simulate and then adjust. Try CPU simulation and no...