cbd7d5f7455b34ba7807
-
0 名用户
正在关注
-
0 名用户
关注者数
-
160
订阅数
- 活动总数 417
- 最后的活动
- 成员加入日期
评论
cbd7d5f7455b34ba7807 最近的活动-
You can do a garment pressure (contact) point view in MD to give you a look at where all the problem areas are on the avatar come in direct contact...
-
Down to using the MD8 avatars then. Alternatively it looks like they are taking the approach that you sub divide your avatar outside MD and bring i...
-
As long as your mesh incoming is a quad geared for subd it should be okay. Otherwise > When you import a new avatar character > select the avatar >...
-
METHOD 1: If you make a cloth tube as a wrapped piece of cloth you need to lower the fabrics particle mesh distance and set the rectangular pattern...
-
A garment mesh can be welded between patterns and the UV is a separate output therefore edges that mate are captured. Is that not the type of seam ...
-
Check you model scales. The flag pole should be at a minimum 1.6 meters tall and the surface offset for that models surface should be 3mm. Looks li...
-
When you collide with an object the mesh areas where you are colliding with and the cloth in that region need to have small enough mesh distance so...
-
There is no bug it means you are not doing the pleat sewing correctly. You need to maybe look at the tutorials again and watch it very closely. Whe...
-
You dont. It's a manual process. And it is best that way, as the human check mitigates error,
-
No, an internal polyline is both a trimesh or quad mesh reference in the surface OR can be exported in addition as a seperate polynurb. It is alway...