CD PROJEKT®, Cyberpunk®, Cyberpunk 2077® are registered trademarks of CD PROJEKT S.A.
© 2021 CD PROJEKT S.A. All rights reserved. All other copyrights and trademarks are the property of their respective owners.

简体中文

Help Center

Marvelous Designer Support

  1. Marvelous Designer
  2. 社区
  3. Need Help
giar19
关注

Pattern issue after exporting

Hi,

I am using MD 10, i have got an issue with the pattern after i export the garment as FBX. The patterns will have additional offset on the edge,  Please see the attachment. Why is that ? Thank you for your help

 

  • closonia 评论操作 固定链接

    Hello @...,

    Thank you for contacting us!

     

    Could you please share the project file with us? If you are okay with this, please send your file via support@marvelousdesigner.com.

    Thank you!

  • giar19 评论操作 固定链接

    Hello Sonia Kong

    Thank you for your reply, sure i will send the file

     

  • giar19 评论操作 固定链接

    Hello Sonia
    I have sent the emai couple weeks ago but i have got any respond, just in case you didnt receive my email i attached link for the  sample file so you can check this out. Here is the link  https://www.dropbox.com/s/sm1d1m8ttbj173w/test.zprj?dl=0

    Thank you for your help 

     

    System Info :

    MD  ver 6.0.617 (r33008)

    i7 9700k

    RTX 2070

    4k display 

  • closonia 评论操作 固定链接

    Hello @...,

    Apologies for the delayed response!

    We didn't receive the file. We will take a look right now!

    Could you let me know the exact option that you used for exporting FBX?

    Thank you in advance!

  • giar19 评论操作 固定链接

    Hello Sonia

    No worries!  and here is my export setting, and  i also just found out that the "Fill Texture Seam" option causes the issue, the bigger a value the bigger additonal offset we get, if we put zero number, i dont have the issue,  is it normal? Thank you   

  • closonia 评论操作 固定链接

    Thank you @... for getting back to us!

    Yes. The outline is filled with texture as you enter the pixels in Fill Texture Seams option.

    For your information, I've attached the manual about 'Fill Texture Seams'. (Please click here to go to manual)

    I hope this information helps you. Should have any other questions, please let us know! Have a lovely day :)

  • giar19 评论操作 固定链接

    Thank you Sonia for the explanation, but what i dont understand is why it also affect to the mesh/3d model, so after exporting my model will have additional mesh on the edge, and it also only happen if i export in FBX format other formats are fine. The good news is i have updated the MD and it seems the problem is disappear now. Again Thank you for your help 

请先登录再写评论。