Avatar Measure (above ver 10)

Objective

Measure the circumference, length and height of the Avatar.
Two methods are provided. Either based on the protruding part of the avatar or based on the surface of the curvature.

Location

Main Menu ▶ Avatar ▶ Measurement

3D Toolbar ▶ Click and hold down the Basic Circumference Measure

Operation

Basic/Surface Circumference Measure.

1. Select the tool/menu indicated in Location.
2. Click the starting point to be measured and click the second point in the desired direction.
   → A Basic/Surface Circumference measure is displayed.
3. Click once more when it is in the target shape.
   → A Basic/Surface Circumference measure is created and the length is displayed.

Basic/Surface/Linear Measure

1. Select the tool/menu indicated in Location.
2. Click the start point to be measured and double-click the end point.
   → A Basic/Surface/Linear Tape Measure is created and its length is displayed.
   → A Linear Measure runs through the Avatar by connecting the start and end points in a straight line.

Height Measure

1. Select the tool/menu indicated in Location.
2. Click the point to be measured.
   → A Height Measure that runs vertically from the clicked point to the ground is created and the length is displayed.

※ Note:

• Hold down the Shift key on the keyboard to create vertical/horizontal/45˚ tilt.
• Use Attach to Measure tool to attach the pattern outline or Internal Line to the Avatar Measure.

Attach to Measure (Avatar)

Objective

Attach avatar tapes to internal or external seam/pattern lines.

Location

Main Menu ▶ Avatar ▶ Measurement ▶ Attach to Measure (Avatar)

3D Toolbar ▶ Click and hold down the Edit Measure (Avatar) ▶ Attach to Measure (Avatar)

Operation

1. Follow the indicated guideline below:
2. In the 3D window, select seam or pattern line to attach to avatar tape.
   → Pattern with the selected line becomes transparent and the selected line gets highlighted in red.
3. Select avatar tape to be attached.
   → Once it is selected, the pattern becomes normal, the attached seam or pattern line and the avatar tape becomes in red.
4. To detach avatar tape from seam or pattern line, click on Attach to Avatar Tape tool again, and press 'Delete' on keyboard.

Edit Measure (Avatar) Option

Objective

Show or hide the length indicated on the Tape Measure

Location

3D Toolbar ▶ Edit Measure (Avatar)

Operation

Select the tool/menu indicated in Location.

Right-click on the Tape Measure and set the options below.