Objective
Create an avatar with your own measurements.
As Avatar Editor is powered by thousands of real body scan data, even measurements not assigned by users automatically adjust to the most realistic body shape.
Location
Main Menu ▶Avatar ▶ Avatar Editor ▶ Avatar Size
Operation
- Load an Avatar (.avt).
Only the avatars provided in ver. 10 V2 and above can be adjusted. - Follow the indicated path below:
Main Menu ▶Avatar ▶ Avatar Editor ▶ Avatar Size
→ Measures appear on the Avatar. The editable measures appear in black, whereas the non-editable measures appear in grey. - Refer to below graph and adjust the Avatar as needed.
| Option | Description | ||
| Select Avatar | Select the Avatar to be edited. This option only appears when two or more Avatars are in the 3D window. | ||
| Total Body |
Shape the overall body type with Avatar's height and chest width. In order to get realistic shapes for body parts without assignable measurements, use the Total Body option to create an overall shape and then insert measurements under the Details option. |
||
| Height |
Assign Avatar's height. ※Note: * Use the drop-down menu on the right to select the unit of the Height. The default unit follows the program's unit. * Degree of Accuracy based on Height Measure Standard: |
||
| Total Height |
Insert the height measured from the ground to the head. ※Note: It is more accurate to assign height with either HPS Height or Inseam option as individual has different head length. The Total Height option is not recommended as it has the lowest accuracy. |
||
| HPS Height | Insert the height measured from the ground to the neck. | ||
| Inseam | Insert the height measured from the ground to the crotch. | ||
| Width | Select and insert desired value as the standard of the overall body width | ||
| Details |
Configure Avatar's detailed measurements. Due to a technical reason, a small error may be generated even after inserting a specific measure. The error appears in parentheses next to each measurement and the real measurement can be checked with the measure appears on the Avatar. Edit the Avatar based on the measure appears on the Avatar as the numbers appear in the Avatar Editor only shows the measurements assigned by users. ※Note: * Use the drop-down menu on the right to select the unit of the Height. The default unit follows the program's unit. * Each measurement can be checked with the measure that appears on the Avatar. |
||
| Basic |
Use the Basic option when only a small amount of body measurements are available. Unassigned body parts are automatically adjusted based on the real body scan data and the measurements inserted by the user. |
||
| Advanced |
Use the Advanced option when available body measurements are abundant. When all measurements under the Advanced options are not available, please use the Basic option to create more realistic body as unassigned measurements are fixed with the default values pre-assigned to each option. |
||
|
Show All Measurements/ Show Editable Measurements |
By default, only editable measurements appear in the window. To view all measurements, click the Show All Measurements icon. |
||
* Use the Save button to save the adjusted measurements and use the Open button to reload. However, any measurements created with lower versions are not compatible.
Article is closed for comments.