Marvelous Designer Support

Over Seamline

(ver MD10)

Select the desired Material Type.
Fabric_Matte, Fabric_Shiny, Fabric_Silk/Satin, Fabric_Velvet, Fur_Strand, Leather, Metal, Plastic

Base Color Map

Color

Select a color by selecting the Square or using color codes. 

Click the Explore button  ( ) and apply a Graphic image from Library/Folder.
Click the Trash can icon to delete the graphic image from the scene.

Desaturate

Desaturate the entire Base Color Map to remove color and convert it into grayscale or black and white. 

Switch

Easily and quickly switch the color of a solid Graphic to a new one without losing the accuracy of the chosen color.

※Note: For consistent results, the Base Color Map should contain 1 color. If the Base Color Map contains multiple colors, users may experience unexpected or unintended results.

Texture image that stores surface normal information in an RBG image. 

Use the same map as the Fabric ON / OFF toggle   (this turns off the intensity slider) 

When a texture or graphic is applied, a Normal Map may be generated by clicking the Generate icon. ( )

Adjust the Intensity with the slider. Higher intensity results in more pronounced details, and a lower intensity makes the details lower to the surface.

Open

Click the Explore Button  ( ) to select a custom Normal map image. 
After you open an image, Transformation settings for Angle, Width, Height, and Aspect Ratio are enabled. 

Additional Application can be registered to open an assigned texture.
Once registered, the application will be listed and remain available for future use.

Open the image in another App (for example, Photoshop) 

Express the thickness or bumpiness of Graphics or textures.
As displacement maps are grey-scaled, their height is determined by the level of darkness of the grey color.

Click the Explore Button  ( ) to select a custom Displacement map image. 

When a texture or graphic is applied, a Displacement Map may be generated by clicking the Generate icon. ( )

Adjust the maximum height of the displacement map. The white area of the displacement map shows the maximum height.

Adjust the distance between the displacement map and the garment surface

Adjust to delete all geometries below the Clipping value.

Adjust the Particle Distance of newly created meshes.

※ Note: As more memory is used for lower Particle Distance, it is recommended not to set the Particle Distance below 1 for a wide area.

Extend the graphic to the adjacent face to eliminate the boundary line.

※ Note: Only applicable to Welded OBJs.

Additional Application can be registered to open an assigned texture.
Once registered, the application will be listed and remain available for future use.

Open the image in another App (for example, Photoshop) 

Express level of transparency using a grayscale image map.

Opacity

Adjust Opacity level from 0-100.

Opacity Map

Click the Explore Button  ( ) to selcet a custom Opacity map image. 

When a texture or graphic is applied, a Opacity Map may be generated by clicking the Generate icon. ( )

Use the same map as Fabric ON / OFF toggle  

RBG

The encoded map with alpha value in RGB channel.

Alpha

The encoded map with alpha value in alpha channel.

Reflection

Use same map as Fabric ON / OFF toggle 

Intensity

Edit Graphic gloss by adjusting Intensity of the Roughness. 
Adjust from 0- 50 (default) - 100

Click the Explore Button  ( ) to select a custom Normal map image. 

When a texture or graphic is applied, a Roughness Map may be generated by clicking the Generate icon. ( )

Adjust the Map's Intensity.

the slider's range is 0-100  with default being 50

Select to invert the gloss of the Graphic. When this option is selected, the shinny part becomes dull and vice-versa. To use Specular Maps provided in below Ver. 6, check this option.

Reflection Intensity

Greater the Reflection Intensity value is, more reflective than the material or Graphic is and vice-versa.

Metalness

Partially express metallics using a grayscale image. The white parts of the map appear metallic.

※Note:

When working with the Metalness Map, control the Roughness Intensity and Reflection Intensity level that are suitable for the metallic texture. (e.g. Roughness Intensity 10, Reflection Intensity 90)

Metalness Map

Partially express metallics using a grayscale image. The white parts of the map appear metallic.

Click the Explore Button  ( ) to select a custom Metalness map image. 

When a texture or graphic is applied, a Metalness Map may be generated by clicking the Generate icon. ( )

Graphic Transformation

Adjust the size of the imported graphic image

Width (mm)

You can change the dimensions by exact measurements or % values

Height (mm)

You can change the dimensions by exact measurements or % values

Lock Aspect ratio

Lock the aspect ratio of the graphic so the ratio remains consistent during size changes