Communication error between local and remote Sentinel HASP License Managers (H0040)
Cause of Error
The Server and Client PCs are unable to communicate with each other.
Solution
1. Type 'services.msc' in the Run window.
2. In the Service window that follows, check whether or not the status of the ‘Sentinel LDK License Manager’ is ‘Running’.
- If the status is not ‘Running’, right-click and select Start.
If the status is ‘Started’, right-click and select Restart.
Reboot.
3. If this does not solve the problem, check both versions of the Server and Client PC’s HASP Drivers.
Make sure both versions are the same.
You are able to check the version under Diagnostics.
4. If this does not work, ask your Network Administrator to confirm the Port communication status between the Server and Client.
Check whether the 1947 Port is being used by another program.
Feature not found (H0031)
Cause of Error
Despite the dongle key has been recognized, the Feature ID of the program and the Feature ID of the dongle key are different. (This occurs when the wrong version of Marvelous Deisnger is installed - i.e. installed the Stand-Alone version for a Network dongle key, and vice versa)
Solution
Make sure the correct version of Marvelous Designer is installed.
ex> Purchased the Network version, but used the Stand-Alone version's installer.
-> Re-install Marvelous Designer using the Network version's installer.
Sentinel HASP key not found (H0007)
Cause of Error
- When the HASP Key is not plugged into the PC.
- Network Version only: the Client PC does not recognize the Server PC that the dongle key is connected to.
- When the HASP Key is recognized, but the Sentinel License Manager service fails to start properly.
Solution
Make sure the HASP is connected to the PC.
- Check the red light of the HASP Key. It should light up when plugged in to the PC.
- Check whether or not the HASP Key shows up in the ACC page (refer to the image below)
- If the red light or the ACC page does not look equal to the image above, refer to the following manual, reinstall the Sentinel HASP Driver.
Too many concurrent users (H0038)
Cause of Error
When the number of users connected to the program exceeds the maximum allowed number of users.
ex> If the maximum number of users (the number of purchased licenses) is 2, and 3 users try to log-in, the last person to attempt a connection will receive an error message.
Solution
Check the number of current users via the link below.
Connect when one of the current users exit the program. ACC Page
Click Sentinel Keys, on the left.
When the Key shows up as the image above, click Sessions, on the right.
The following page should display the current user(s).
Connect when one of the current users exits the program.
If any unauthorized user is connected, click the Disconnect button on the right to log the person out of the program.
Unable to access Sentinel HASP Run-time Environment(H0033)
Cause of Error
The HASP Driver has not been properly installed on the PC, or the Driver is damaged. To confirm whether it is properly installed, enter http://localhost:1947 or http://127.0.0.1:1947 into your web browser, or click on the following link ( ACC Page ). If the following page does not look equal to the image below, there is a problem with the Sentinel HASP Driver.
Solution
Refer to the following manual and reinstall the HASP Driver.
Article is closed for comments.