Marvelous Designer Support

Objective

Create a Block of a desired Garment and apply it to your design.

Location

Open Modular Template

Modular Mode ▶ Block Editor ▶ Modular Template Presets

Load and Place Patterns

Modular Mode ▶ Block Editor

Sew Patterns to Block Boxes

Modular Mode ▶ Block Editor

Operation

Open Modular Template

1. Follow the indicated guideline below:

Modular Mode ▶ Block Editor ▶ Modular Template Presets

→ Modular Template Presets window appears.

2. Select a desired Garment category and Modular Template type, click OK.
→ The selected Modular Template appears in the 2D window.

Load and Place Patterns
1. With a Modular Template opened, follow the indicated guideline below:

Modular Mode ▶ Block Editor

2. Add desired Garment files to place into the Block Boxes.

3. From the added Garment files, click and drag the Patterns to the matching Block Boxes.
→ The Patterns are linked into the Block Boxes and Block Boxes turn into dark grey.

4. Sew Patterns to Block Boxes, then Simulate.

Sew Patterns to Block Boxes

1. Follow the indicated guideline below:

Modular Mode ▶ Block Editor

2. Click on Segment Sewing or Free Sewing tool.

3.Sew Patterns and Block Boxes.
→ Sewn parts of the Block Boxes turn into darker grey.

※ Note:

• Block Boxes are sewn together by default.
• Patterns that are sewn alone (i.e. hems, sleeves or armholes of a sleeveless style) do not need to be sewn to Block Boxes.
• Difference in length between the actual Patterns and the Block Boxes has no effect on the Simulation.
• Rest of the principle is the same as the Simulation Mode.
• To show Sewing Lines between Block Boxes and Patterns, activate the Show Modular Sewing/Show Pattern Sewing tool. This tool is activated by default in the Modular Mode. Click it again to either hide or show all Sewing Lines.