Objective
Change status of buttons as desired.
Location
3D Toolbar ▶ Select/Move Button ▶ Pop-up Menu (Right-click 3D/2D Button)
Main Menu ▶ Materials ▶ Button ▶ Select/Move Button
3D Toolbar ▶ Select/Move ▶ Pop-up Menu (Right-click 3D/2D Button)
Operation
-
Follow the indicated guideline:
3D Toolbar ▶ Select/Move Button ▶ Pop-up Menu (Right-click 3D/2D Button)
Main Menu ▶ Materials ▶ Button ▶ Select/Move Button
3D Toolbar ▶ Select/Move ▶ Pop-up Menu (Right-click 3D/2D Button)
-
Right-click on the button to edit.
→ Button related pop-up menu appears.
Pop-up Menu | Description |
Reset 3D Position | Reset to location of pre-simulation. |
Copy | Copy the selected button. |
Paste | Paste the selected button. |
Mirror Paste (Position Only) | Mirror paste the position of the selected button. |
Delete | Delete the selected button. |
Duplicate to Symmetric Pattern | Duplicate the selected button to its symmetric pattern. |
Activate/Deactivate | Activate or deactivate the selected button. |
Freeze/Unfreeze | Freeze or unfreeze the selected button. |
Set Number of Sewing Layers | Set the number of sewing layers for the selected button. After setting the Number of Sewing Layers, use the Select/Move Button tool to adjust buttons' locations on each Patterns. |
Flip | Move the selected button to the opposite side. |
Align | Align selected buttons based on the selected options. |
Distribute | Distribute selected buttons horizontally or vertically with same intervals |
Article is closed for comments.