OBJ TRIM: Glue OBJ Trim

Objective

Glue 3D Trims onto Garments and simulate together (ver3.0.0).

Location

Main Menu ▶ File ▶ Import ▶ OBJ

Operation

Glue OBJ Trim

1. Follow the indicated guideline below:

   Main Menu ▶ File ▶ Import ▶ OBJ

   → Open File window appears.
   
   

2. Select desired OBJ file and click OK to load.
   
   
3. In the pop-up menu, select Load as Trim for the Object Type, and click OK.
   
   
4. Click the loaded OBJ with the Select/Move tool.
   → Gizmo for the selected OBJ appears.
   
   
5. Click on the Glue icon next to the OBJ Gizmo, then mouse over the desired location.
   → OBJ preview tags along the mouse.
   
   
6. Click on the desired location.
   → Selected OBJ automatically attaches to the place.
   
   

7. Use the Gizmo to adjust the position and angle.

   ※ Note: To cancel the arrangement, press Esc on the keyboard.
   
   

8. Activate Simulation.
   → OBJ is now being simulated along with the rest of the Garments.

    

※Note: You can select multiple OBJ trims and move or rotate those by using Gizmo. (ver. 11 )

Delete OBJ Trim

1. Right click on the OBJ trim.
   → OBJ is now being selected and a pop-up menu appears.

   ※ Note: Relevant menu above does not appear for OBJ trims that are not glued to the Garments.

2. Click on Delete to remove it.
   → Selected OBJ is now being removed from the Garments.