Objective
Extrude garment to express thickness.
(These settings will apply to mesh export when using Thick export option, or use for 3D display only).
Location
2D Toolbar ▶ Edit Pattern / Transform Pattern
3D Window ▶ Garment Display Option ▶ Wireframe on Monochrome (Thick) (ver. 2024.2)
Operation (ver. 2024.2)
-
Follow the guideline below to set Garment Display Option to Wireframe on Monochrome (Thick).
3D Window ▶ Garment Display Option ▶ Wireframe on Monochrome (Thick) - Follow the indicated guideline below:
2D Toolbar ▶ Edit Pattern / Transform Pattern
- Select a Pattern or Pattern line to express doubled sided effect.
→ Its properties appear in the Property Editor.
-
Property Editor ▶ Geometry
→ Modifies the Geometry Properties which will affect mesh style / extrusion direction when exporting with thickness.
Geometry Properties
| Add'l Thickness - Rendering (mm) | Displays the added thickness in addition to the Thickness value of Fabric Style. | |
| Extrusion Direction | Sets the direction to display the thickness. | |
| Both | Apply the thickness front/rear around the pattern. | |
| Forward | Apply the thickness in the front direction of the pattern. | |
| Backward | Apply the thickness in the rear direction of the pattern. | |
| Front Face | Set whether or not the front part is displayed based on the normal direction. | |
| Back Face | Set whether or not the back part is displayed based on the normal direction. | |
| Seam Face | Set whether or not to show overlapping sides on the sewn line. | |
| Side Geometry | Curvature (%) | Set side geometry lateral curvature percentage. |
| Resolution | Set divisions for the side mesh. | |
| Double Side | Apply Curvature attribute values to both front and back symmetrical from the pattern. | |
| Mesh Style | Triangle | Re-mesh the pattern using triangular mesh option |
| Quad (Optimized) | Re-mesh the pattern using quadrangular mesh option. Generates aligned automatic Retopology results. | |
| Quad (Grid) |
Re-mesh the pattern using quadrangular mesh option. Generates pattern with a uniform grid. |
|
| Face Count | Display total face count of the pattern. | |
| Vertex Count | Display total vertex count of the pattern. | |
Operation (Ver. 2024.1 and bellow)
- Follow the indicated guideline below:
2D Toolbar ▶ Edit Pattern / Transform Pattern
- Select a Pattern or Pattern line to express doubled sided effect.
→ Its properties appear in the Property Editor.
- Property Editor ▶ Selected Line ▶ Curved Side Geometry ▶ Check on Double Sided
→ The selected Pattern or Pattern line is now being displayed as double sided.
Article is closed for comments.