Objective
Utilize four Garment Fit Maps in the 3D window to check 3D Gament's fit.
Location
3D Window ▶ Hover the Mouse Over the 5th Icon
Operation
- Follow the indicated guideline below:
3D Window ▶ Hover the Mouse Over the 5th Icon
→ Four Garment Fit Maps appear. - Refer to the table below and select the desired view icon.
Icon Description Stress Map
(Below ver. 12)External stress causing garment distortion per area of the fabric appears in the range of color and numbers.
Stress Map appears in a total of eight colors: Red indicates the strongest stress (100kPa) while blue indicates zero distortion (0.00kPa). Other numbers in between are expressed as gradation of two colors.Strain Map Garment's distortion rate due to external stress appears in percentage.
Stain Map appears in a total of eight colors: Red indicates a 120% of distortion rate while blue indicates 100% (no distortion). Numbers in between are expressed as gradation of two colors.Fit Map
(Below ver. 12)Fip Map shows the tightness of the 3D Garment.
Can't Wear appears in red indicating not wearable area.
Very Tight appears in orange indicating a very tight area.
Tight appears in yellow indicating a slightly tight area.Show Pressure Points Show or hide contact points between 3D Garment and Avatar.
→ Based on the selected icon, Stress Map, Strain Map, Fit Map, or Pressure Points appear on the 3D Garment.
Article is closed for comments.