Marvelous Designer Support

Objective

Configure graphics to repeat along the x-axis, y-axis, or all over the pattern. Use this function when graphics are used repeatedly on a Garment.

Location

Via the Property Editor

Main Menu ▶ Materials ▶ Graphics ▶ Graphic (2D Pattern) or Graphic (3D Pattern)

2D Toolbar or 3D Toolbar ▶  Graphic (2D Pattern) or  Graphic (3D Pattern)

Via the Right-Click Pop-Up Menu

Main Menu ▶ Materials ▶ Graphics ▶ Transform Graphic ▶ Right-Click (on Graphic)

2D Toolbar or 3D Toolbar ▶ Transform Graphic ▶ Right-Click (on Graphic)

Operation

Via the Property Editor

1. Follow the path:

   Main Menu ▶ Materials ▶ Graphics ▶ Graphic (2D Pattern) or Graphic (3D Pattern)

   2D Toolbar or 3D Toolbar ▶ Graphic (2D Pattern) or Graphic (3D Pattern)

   → The properties of the selected graphic will appear in the Property Editor.

    

2. Find the Tile menu in the Property Editor and adjust the settings below as needed:
   
   

   Option	Description
   Revert to Original	Reset the graphic to its original configuration before this function was used.
   X-Axis	Repeat the graphic along the x-axis of the pattern, while maintaining its dimensions.
   Y-Axis	Repeat the graphic along the y-axis of the pattern, while maintaining its dimensions.
   Pattern	Repeat the graphic across the entire pattern, while maintaining its dimensions.

   
   → The selected graphic will be tiled according to the menu selection.

Via the Right-Click Pop-Up Menu 

1. Follow the path:

   Main Menu ▶ Materials ▶ Graphics ▶ Transform Graphic ▶ Right-Click (on Graphic)

   2D Toolbar or 3D Toolbar ▶ Transform Graphic ▶ Right-Click (on Graphic)

   
   → Right-click pop-up menu appears.

2. Navigate to Tile and select from the available options (same as Property Editor).
   → The selected graphic will be tiled according to the menu selection.

※Note: When a graphic is repeated using this function, its Graphic Transformation ▶ Original Width and Original Height values will change.