Marvelous Designer Support

Objective

Create lines on Garment and avatar and tack to each other by lines. (Ver. MD7)

Location

3D window tool bar Line tack on Avatar tool

Operation

1. Select the tool according to the Location above.
2. Mouse over to a garment from 3D window.
   Point follows mouse cursor.
3. Double click on the garment where want to create start point of line / shape.
   Double click to complete the line / shape
   Double click on start point of line to create closed shape.
   Once a line is created on the garment, 3D garment will be transparent, can create line on the avatar directly.
4. Create second line/ shape.
   Once all the two lines / shapes have been created, connection line for line / shape will be displayed.
5. Click the simulation button.
   Two lines/ shapes tack to each other along the connection line.

• During the creation of the line, pressing the Shift key will display the front, back, side center line and guide line of last point.
• Press the Ctrl key to create curved line.
• When creating a line, can cancel it from the last point by pressing the Delete key on Keyboard. Press the Esc / Ctrl+Z to cancel the whole point.