Marvelous Designer Support

Objective

Create lines on Garment and tack to each other by lines / shapes. (Ver. MD7)

Location

3D window tool bar Line tack tool

Operation

1. Select the tool according to the Location above.
2. Mouse over to a garment from 3D window.
   Point follows mouse cursor.
3. Double click on the garment where want to create start point of line / shape.
   Double click to complete the line / shape
   Double click on start point of line to create closed shape.
4. Create second line/ shape.
   Once all the two lines / shapes have been created, connection line for line / shape will be displayed.
5. Click the simulation button.
   Two lines/ shapes tack to each other along the connection line.

• During the creation of the line, pressing the Shift key will display the front, back, side center line and guide line of last point.
• Press the Ctrl key to create curved line.
• When creating a line, can cancel it from the last point by pressing the Delete key on Keyboard. Press the Esc / Ctrl+Z to cancel the whole point.