Objective
Check Simulation Speed of CLO on device in use. Recommended Simulation Speed for running CLO is between 25 and 30 FPS when simulating the pre-loaded default garment.
Location
Main Menu ▶ Display ▶ Environment ▶ Show Frame Rate
Operation
1. Follow the indicated guideline below:
Main Menu ▶ Display ▶ Environment ▶ Show Frame Rate
→ The Simulation Speed displays at the bottom-left corner of the 3D window.
※ Note: The Simulation Speed is measured when the simulation is on. The higher the value of FPS (Frames per Second), the faster the simulation speed.
Article is closed for comments.